The last step in fixing a rod by putting on a new wrap is to apply finish to the wrap. The epoxy I use is Flexcoats high build it runs about $13 at Mudhole Tackle supply. I am not the greatest at finishing a rod but I am getting better with time and practice so if your does not come out perfect the first time don't panic. If you get the "Fuzzies" you can gently sand them after the finish has dried and add a second coat. There are countless articles and message boards to reference by googling rod building fuzzies.
Once again I am going to leave you with a Youtube video that is easy to follow and understand.
Once you have allowed your finish to dry wait atleast 24 hrs or more before bending or fishing with the rod. This allows time for the Finish to full dry and any stress can causes cracks in the finish.
Out With The Old
In With The New (with a little ECU touch)
I hope I have provided the basics of rod wrap repair, any question feel free to comment or email me. If I don't know the answer I can find it. Just remember this is not a fast process the first couple times around, take your time enjoy it and good luck.
No comments:
Post a Comment